‌EN 10217-1 ERW Non-Alloy Steel Pipe - Pressure Purpose, Cold Drawn‌

‌EN 10217-1 ERW Non-Alloy Steel Pipe - Pressure Purpose, Cold Drawn‌

# Product Title(主标题,SEO 核心,直接复制) EN 10217-1 ERW Non-Alloy Steel Pipe - Pressure Purpose, Cold Drawn > > Meta Title(独立站 / 外贸快车标题,适合谷歌):EN 10217-1 ERW Cold Drawn Non-Alloy Steel Pipe for Pressure Purposes | P235TR1 P235TR2 P265TR1 P265TR2 > Meta Description(描述,谷歌摘要):We supply EN 10217-1 ERW cold drawn non-alloy steel pipe for pressure service. Available grades P195TR1, P195TR2, P235TR1, P235TR2, P265TR1, P265TR2. Full chemical & mechanical test, NDT, PED compliant, custom sizes, fast delivery. --- ## 1. Product Overview(产品简介,开篇,埋关键词) EN 10217-1 ERW Non-Alloy Steel Pipe - Pressure Purpose, Cold Drawn is electric resistance welded, cold finished carbon steel tube complying with European standard EN 10217-1 (Welded steel tubes for pressure purposes, non-alloy steel with specified room temperature properties). It covers two quality levels TR1 and TR2. TR2 meets PED 2014/68/EU requirements for European pressure equipment systems. Cold drawing delivers tighter dimensional tolerance, smoother inner & outer surface, uniform wall thickness and better mechanical consistency compared with regular hot finished ERW pipes. This pipe is widely used for pressure piping, compressed air, water, low-pressure fluid transfer, boiler auxiliary lines and general pressure installations at ambient temperature. **SEO Keywords naturally embedded**: EN 10217-1 pipe, EN 10217-1 ERW tube, cold drawn ERW pressure pipe, P235TR2 steel pipe, PED compliant pressure steel tube, non-alloy welded steel pipe for pressure purposes ## 2. Standard & Material Grades(标准和材质牌号) - Executive Standard: **EN 10217-1:2002+A1:2005 / BS EN 10217-1** - Pipe Type: ERW (Electric Resistance Welded / HFW), Cold Drawn - Quality Class: TR1, TR2 - Available Steel Grades: P195TR1, P195TR2 P235TR1, P235TR2 P265TR1, P265TR2 - Classification: Non-alloy quality carbon steel, fully killed steel for TR2 grade - Compliance: PED 2014/68/EU (TR2), EN 10021 general technical delivery conditions ## 3. Size & Specification(规格范围,可按需微调) - Outer Diameter (OD): 10 mm – 219.1 mm (cold drawn ERW range) - Wall Thickness (WT): 1.5 mm – 12.7 mm - Standard Length: 5.8 m, 6 m, 11.8 m, 12 m; cut-to-length available - Tolerance (Cold Drawn): OD: ±0.3 mm or ±0.5% (strict cold drawn tolerance) Wall thickness: ±5% Straightness: ≤1.5 mm/m - End Finish: Plain ends, bevelled ends, capped ends - Surface: Black, oiled, varnished, anti-rust treatment - Packaging: Bundled with steel strips, waterproof wrapping, marking per EN 10217-1 requirement ## 4. Chemical Composition (wt%, Max)(化学成分,核心技术内容) 表格 | Grade | C | Mn | P | S | Si | | --- | --- | --- | --- | --- | --- | | P195TR1 / P195TR2 | 0.17 | 1.20 | 0.030 | 0.025 | 0.35 | | P235TR1 / P235TR2 | 0.17 | 1.40 | 0.030 | 0.025 | 0.35 | | P265TR1 / P265TR2 | 0.20 | 1.40 | 0.025 | 0.020 | 0.35 | > > Note: TR2 grade requires fully killed steel and nitrogen binding elements; ladle analysis & product analysis reports supplied.## 5. Mechanical Properties at Room Temperature(机械性能)表格| Grade|Min Yield Strength Rp0.2 (MPa)|Tensile Strength Rm (MPa)|Min Elongation A (%) || ---|---|---|--- || P195TR1 / P195TR2|195|320 – 440|27 || P235TR1 / P235TR2|235|360 – 500|25 || P265TR1 / P265TR2|265|410 – 570|24 |- Test Standard: EN 10002-1 (tensile test)- Suitable for cold bending, flaring, expanding, threading under proper procedure- TR2: extra inspection level for pressure equipment directive## 6. Production Process(生产流程)1. High-quality hot rolled steel strip incoming inspection2. Slitting strip to required width3. Roll forming → ERW high-frequency welding4. Weld bead removing (inside & outside scarfing)5. Online weld NDT (Eddy Current)6. Heat treatment (stress relief if required)7. Cold drawing process for precision dimension & smooth surface8. Straightening, cutting to fixed length9. Finishing, end facing / bevelling10. Offline destructive & non-destructive testing11. Marking, anti-rust treatment, packing, dispatch## 7. Applications(用途,面向买家场景)EN 10217-1 cold drawn ERW non-alloy steel pipe is designed for pressure service at room temperature.- Pressure piping systems for compressed air, water, inert gas- Boiler auxiliary pipelines, heat exchanger auxiliary tubes- Industrial fluid transport pipelines- Pressure vessel connecting piping- Mechanical pressure circuits, hydraulic piping (low pressure)- Heating and cooling systems- European industrial projects, PED pressure equipment assembly- General engineering, plant construction, skid piping## 8. Our Product Advantages(优势,转化卖点)✅ Cold drawn process: tighter tolerance, bright smooth surface, uniform wall thickness, better weld integrity than regular ERW✅ Strictly follow EN 10217-1, TR2 grade available with PED documentation✅ Complete test documents: MTC 3.1 / 3.2 available upon request✅ Full NDT package: Eddy current test, hydrostatic test, PMI, dimensional inspection✅ Flexible sizes: small OD precision cold drawn tubes are our strength✅ Stable raw material source, consistent chemical & mechanical performance✅ Custom marking, cutting, anti-rust package for EU market✅ Fast lead time, support small trial order and bulk project order✅ Professional export team, familiar with EU pressure equipment documentation requirement## 9. Inspection & Testing(检测项目)- Raw material ladle analysis and product chemical analysis- Tensile test at room temperature- Dimensional & visual inspection- Hydrostatic test / Air pressure test- Eddy Current Testing (ECT) for weld seam- PMI positive material identification- Bend test / Flare test (on request)- Ultrasonic testing (UT, optional)- Third-party inspection accepted (SGS, BV, TÜV)- Mill Test Certificate (MTC) according to EN 10204 3.1 or 3.2## 10. FAQ(FAQ 区块,谷歌喜欢抓取,解决买家疑问)### Q1: What is the difference between TR1 and TR2 in EN 10217-1?A: TR1 is general quality for non-critical pressure application. TR2 is fully killed steel, with stricter inspection and documentation, suitable for PED 2014/68/EU pressure equipment for European market.### Q2: What does cold drawn mean for this ERW pipe?A: After ERW welding, the tube goes through cold drawing die to get precise OD, smooth surface and consistent wall thickness. It improves roundness and reduces tolerance for precision pressure piping.### Q3: Can you supply MTC 3.2 and TÜV certification?A: Yes. MTC 3.1 is standard supply; MTC 3.2 and third-party TÜV inspection can be arranged as per buyer requirement.### Q4: Is EN 10217-1 ERW pipe suitable for high temperature service?A: No. EN 10217-1 is for room temperature properties only. For elevated temperature pressure service, please refer to EN 10217-2.### Q5: What trade terms can you offer?A: FOB, CFR, CIF, DDP are available. We support full export documentation for EU customs and PED compliance.### Q6: Can we order custom sizes?A: Yes. Cold drawn line supports custom OD, wall thickness and fixed cut lengths, MOQ depends on dimension.### Q7: What anti-rust protection do you provide?A: Oiling, transparent varnish, plastic end caps, waterproof wrapping and steel strapping for sea shipment.---## Short Bullet Version(外贸快车短描述,产品摘要栏直接粘贴)EN 10217-1 ERW Non-Alloy Steel Pipe - Pressure Purpose, Cold Drawn. European standard welded pressure tube, grades P195TR1/P195TR2/P235TR1/P235TR2/P265TR1/P265TR2, TR2 PED compliant. Cold drawn for precise tolerance and smooth surface. OD 10–219.1 mm, WT 1.5–12.7 mm. For compressed air, water, low-pressure fluid, boiler auxiliary and pressure piping. Hydro test, ECT, PMI, MTC 3.1/3.2. Custom cut length, anti-rust packing, EU project supply.
Aanvraag sturen

 

EN 10217-1 ERW Non-Alloy Steel Pipe - Pressure Purpose, Cold Drawn is electric resistance welded, cold finished carbon steel tube complying with European standard EN 10217-1 (Welded steel tubes for pressure purposes, non-alloy steel with specified room temperature properties). It covers two quality levels TR1 and TR2. TR2 meets PED 2014/68/EU requirements for European pressure equipment systems. Cold drawing delivers tighter dimensional tolerance, smoother inner & outer surface, uniform wall thickness and better mechanical consistency compared with regular hot finished ERW pipes. This pipe is widely used for pressure piping, compressed air, water, low-pressure fluid transfer, boiler auxiliary lines and general pressure installations at ambient temperature.

 

 

EN 10217-1:2002+A1:2005 / BS EN 10217-1.

Pipe Type: ERW (Electric Resistance Welded / HFW), Cold Drawn.

Quality Class: TR1, TR2.

Available Steel Grades: P195TR1, P195TR2 P235TR1, P235TR2 P265TR1, P265TR2.

Classification: Non-alloy quality carbon steel, fully killed steel for TR2 grade.

Compliance: PED 2014/68/EU (TR2), EN 10021 general technical delivery conditions.

 

 

Outer Diameter (OD): 10 mm – 219.1 mm (cold drawn ERW range).

Wall Thickness (WT): 1.5 mm – 12.7 mm.

Standard Length: 5.8 m, 6 m, 11.8 m, 12 m; cut-to-length available.

Tolerance (Cold Drawn): OD: ±0.3 mm or ±0.5% (strict cold drawn tolerance) Wall thickness: ±5% Straightness: <=1.5 mm/m.

End Finish: Plain ends, bevelled ends, capped ends.

Surface: Black, oiled, varnished, anti-rust treatment.

Packaging: Bundled with steel strips, waterproof wrapping, marking per EN 10217-1 requirement.

 

 

C

P

S

P195TR1 / P195TR2

0.17

1.20

0.030

0.025

0.35

P235TR1 / P235TR2

0.17

1.40

0.030

0.025

0.35

P265TR1 / P265TR2

0.20

1.40

0.025

0.020

0.35

 

Note: TR2 grade requires fully killed steel and nitrogen binding elements; ladle analysis & product analysis reports supplied.

 

 

Min Yield Strength Rp0.2 (MPa)

P195TR1 / P195TR2

195

320 – 440

27

P235TR1 / P235TR2

235

360 – 500

25

P265TR1 / P265TR2

265

410 – 570

24

 

Test Standard: EN 10002-1 (tensile test)

TR2: extra inspection level for pressure equipment directive

 

 

✅High-quality hot rolled steel strip incoming inspection

✅Roll forming → ERW high-frequency welding

✅Offline destructive & non-destructive testing

✅Marking, anti-rust treatment, packing, dispatch

 

 

EN 10217-1 cold drawn ERW non-alloy steel pipe is designed for pressure service at room temperature.

Pressure piping systems for compressed air, water, inert gas.

Boiler auxiliary pipelines, heat exchanger auxiliary tubes.

Industrial fluid transport pipelines.

Pressure vessel connecting piping.

Mechanical pressure circuits, hydraulic piping (low pressure).

Heating and cooling systems.

European industrial projects, PED pressure equipment assembly.

General engineering, plant construction, skid piping.

 

 

✅ Cold drawn process: tighter tolerance, bright smooth surface, uniform wall thickness, better weld integrity than regular ERW.

✅ Strictly follow EN 10217-1, TR2 grade available with PED documentation.

✅ Complete test documents: MTC 3.1 / 3.2 available upon request.

✅ Full NDT package: Eddy current test, hydrostatic test, PMI, dimensional inspection.

✅ Flexible sizes: small OD precision cold drawn tubes are our strength.

✅ Stable raw material source, consistent chemical & mechanical performance.

✅ Custom marking, cutting, anti-rust package for EU market.

✅ Fast lead time, support small trial order and bulk project order.

✅ Professional export team, familiar with EU pressure equipment documentation requirement.

 

 

Third-party inspection accepted (SGS, BV, TÜV)

Mill Test Certificate (MTC) according to EN 10204 3.1 or 3.2

 

 

Q: Q1: What is the difference between TR1 and TR2 in EN 10217-1?

A: A: TR1 is general quality for non-critical pressure application. TR2 is fully killed steel, with stricter inspection and documentation, suitable for PED 2014/68/EU pressure equipment for European market.

Q: Q2: What does cold drawn mean for this ERW pipe?

A: A: After ERW welding, the tube goes through cold drawing die to get precise OD, smooth surface and consistent wall thickness. It improves roundness and reduces tolerance for precision pressure piping.

Q: Q3: Can you supply MTC 3.2 and TÜV certification?

A: A: Yes. MTC 3.1 is standard supply; MTC 3.2 and third-party TÜV inspection can be arranged as per buyer requirement.

Q: Q4: Is EN 10217-1 ERW pipe suitable for high temperature service?

A: A: No. EN 10217-1 is for room temperature properties only. For elevated temperature pressure service, please refer to EN 10217-2.

Q: Q5: What trade terms can you offer?

A: A: FOB, CFR, CIF, DDP are available. We support full export documentation for EU customs and PED compliance.

Q: Q6: Can we order custom sizes?

A: A: Yes. Cold drawn line supports custom OD, wall thickness and fixed cut lengths, MOQ depends on dimension.

Q: Q7: What anti-rust protection do you provide?

A: A: Oiling, transparent varnish, plastic end caps, waterproof wrapping and steel strapping for sea shipment.

 

QQ20260514-1041421

 

 
Email: kepia@tjshenzhoutong.com
Address: Chenda Road,Daqiuzhuang Town Jinghai County,Tianjin,China.

Number: +86-22-58162536

Mob/Whatsapp/Wechat: +86-15822996332
 

 

 

 

Populaire tags: ‌en 10217-1 erw non-alloy steel pipe - pressure purpose, cold drawn‌, China ‌en 10217-1 erw non-alloy steel pipe - pressure purpose, cold drawn‌ manufacturers, suppliers, factory